Stainless Steel 347 Stud Bolt
Stainless Steel Stud Bolt
- Stainless Steel 304 Stud Bolt
- Stainless Steel 304H Stud Bolt
- Stainless Steel 304L Stud Bolt
- Stainless Steel 310 Stud Bolt
- Stainless Steel 316 Stud Bolt
- Stainless Steel 316H Stud Bolt
- Stainless Steel 316L Stud Bolt
- Stainless Steel 317 Stud Bolt
- Stainless Steel 321 Stud Bolt
- Stainless Steel 347 Stud Bolt
- Stainless Steel 904L Stud Bolt
- 254 SMO Stud Bolt
DIN 1.455 Full Threaded Stud Bolt, UNS S34700 Double End Stud Bolt, SS 347 Tap End Threaded Rod, ASTM A193 Stainless Steel 347 Half Threaded Rod, ASME SA193 Stainless Steel 347 Tap End Stud Bolt, DIN 1.455 Half Threaded Stud Bolt.
What do Stainless Steel 347 Stud Bolts mean?
Columbium stabilized stainless steel austenitic alloy grade with superior corrosion resistance is designated as Stainless-Steel Grade 347/347H. This grade exhibits exceptional resistance to carbide precipitation-induced intergranular corrosion. Additionally, stainless steel 347 stud bolts may be tailored to meet individual needs in terms of diameters and thicknesses. The alloy is taken into consideration for applications requiring intermittent heating between temperatures of 427°C and 899°C or welding under circumstances preventing post-weld annealing.
Properties of Stainless Steel 347 Stud Bolts:
Numerous other qualities of UNS S34700 Full Threaded Rods include exceptional resistance to considerable corrosion and lower acids. It also effectively resists degradation and titanium carbide precipitation in the temperature range. These Stud bolts are appropriate for severe load circumstances and highly challenging working conditions because of their high tensile strength and creep resistance. Due to its relative ductility and toughness, DIN 1.4550 Half threaded stud bolts may be freely stamped, drawn, blanked, and spun.
![](https://www.pipefittingsolutions.com/wp-content/uploads/2022/10/ss-347-stud-bolt.png)
About Stainless Steel 347 Stud Bolt
Characteristics of 347 Stud Bolts:
- Because ASTM A193 SS 347 Stud Bolts were designed to withstand high temperatures, their resistance to water corrosion was constrained.
- Good strength yield strength, short- and long-term creep resistance, resistance to rust from oxygen and organic compounds, etc., are all characteristics of Stainless Steel 347 Stud Bolts.
- The material Grade 347 Tap End Stud Bolts, however, are vulnerable to dynamic recrystallization in the heat-corresponding layer of welds because of their high carbon content.
- High ash content Composition 347 Grade PTFE Stud Bolts may be welded using any fusion or resistance welding technique, making them one of the highest-alloy steels regarded as the best weldable.
Applications of Stainless Steel 347 Stud Bolts:
- SS 347 Zinc Plated stud bolts have the most common applications in aircraft collection rings, heat transfer tubes, strong wall welded machines, cabin heaters, and exhaust stacks.
- Industrialists found stainless steel 347 tie stud bolts among all the alloy steels to be the most weldable. They may be joined using both resistance welding and fusion techniques. Better intergranular corrosion resistance and concentrated inclinations to form an unbroken network of carbon steels at the grain boundaries are two characteristics of stainless steel 347H tie bars.
- In the chemical, and gas industries, 347 stainless steel stud bolts are frequently used in heating systems, compressors, heat exchangers, pipelines, and condensers.
Specification Of Stainless Steel 347 Stud Bolt
Specifications | ASTM A 193 / ASME SA 193 and DIN, ISO ,JIS ,GB, IS, BS, ASTM and all International Standards |
Size | M3 - M100 | 3/6″ - 4″ | Custom Sizes |
Sud Bolt Length | 3 mm - 200 mm | Custom Sizes |
Dimensions | DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 |
Threads Configuration | UNF, BSW, BSF, METRIC, UNC, or as required and ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
Form | Hex, Threading, Square, Round as per Gauge Etc. |
Head | Hex, Square, Round, Hex flange, Flat, T-head & Triangular etc. |
Neck type | Hex, Square, Triangular, Oval & Knurled etc. |
Manufacturing Process | Passivation /plain, Wire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing. |
Surface Coating | Black Oxide, Cadmium, Galvanized, Teflon, Xylan, Zinc, Others Upon Request |
Packing | IN BULK: carton, pallet, Small Boxes or customer request |
Test Certificate | As per EN 10204 / 3.1 Manufacturer Test Certificate, PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
Certification | Dual Certified As per ASTM & ASME Codes |
Delivery time | Regular product : 7-15 days, Custom product : 2-4 weeks |
Equivalent Grades Stainless Steel 347 Stud Bolt
STANDARD | WERKSTOFF NR. | UNS | JIS | GOST | EN |
SS 347 | 1.4550 | S34700 | SUS 347 | 08Ch18N12B | X6CrNiNb18-10 |
Chemical Composition Stainless Steel 347 Stud Bolt
Grade | C | Mn | Si | P | S | Cr | Cb | Ni | Fe |
SS 347 | 0.08 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 - 20.00 | 10xC – 1.10 | 9.00 - 13.00 | 62.74 min |
Mechanical Properties Stainless Steel 347 Stud Bolt
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.0 g/cm3 | 1454 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Dimensions Of Stainless Steel 347 Stud Bolt
Stainless Steel Stud Bolts Dimensions Chart :
![](https://www.pipefittingsolutions.com/wp-content/uploads/2022/10/stud-Dimensions.png)
Nominal Size Diameter, D inch | Tap End Full Thread Length, BM | Umax = 2P | Minimum Nut End Full Thread Length, Bmin |
||||||
Nominal | Min. | Max. | UNC & NC-5 Thread | UNF Thread | 8UN Thread | L ≤ 10 | 10 | L > 16 | |
1/4 | 0.375 | 0.350 | 0.400 | 0.100 | 0.071 | ... | 0.750 | 1.000 | 1.500 |
5/16 | 0.469 | 0.440 | 0.498 | 0.111 | 0.083 | -- | 0.875 | 1.125 | 1.625 |
3/8 | 0.563 | 0.532 | 0.594 | 0.125 | 0.083 | -- | 1.000 | 1.250 | 1.750 |
7/16 | 0.656 | 0.620 | 0.692 | 0.143 | 0.100 | -- | 1.125 | 1.375 | 1.875 |
1/2 | 0.750 | 0.708 | 0.792 | 0.154 | 0.100 | -- | 1.250 | 1.500 | 2.000 |
9/16 | 0.844 | 0.802 | 0.896 | 0.167 | 0.111 | -- | 1.375 | 1.625 | 2.125 |
5/8 | 0.938 | 0.892 | 0.983 | 0.182 | 0.111 | -- | 1.500 | 1.750 | 2.250 |
3/4 | 1.1.25 | 1.075 | 1.175 | 0.200 | 0.125 | -- | 1.750 | 2.000 | 2.500 |
7/8 | 1.313 | 1.258 | 1.368 | 0.222 | 0.143 | -- | 2.000 | 2.250 | 2.750 |
1 | 1.500 | 1.438 | 1.562 | 0.250 | 0.167 | -- | 2.250 | 2.500 | 3.000 |
1 1/8 | 1.688 | 1.625 | 1.750 | 0.286 | 0.167 | 0.250 | 2.500 | 2.750 | 3.250 |
1 1/4 | 1.875 | 1.813 | 1.938 | 0.286 | 0.167 | 0.250 | 2.750 | 3.000 | 3.500 |
1 3/8 | 2.063 | 2.000 | 2.125 | 0.333 | 0.167 | 0.250 | 3.000 | 3.250 | 3.750 |
1 1/2 | 2.250 | 2.188 | 2.313 | 0.333 | 0.167 | 0.250 | 3.250 | 3.500 | 4.000 |
1 5/8 | 2.438 | 2.375 | 2.500 | -- | -- | 0.250 | 3.500 | 3.750 | 4.250 |
1 3/4 | 2.625 | 2.563 | 2.688 | 0.400 | -- | 0.250 | 3.750 | 4.000 | 4.500 |
1 7/8 | 2.813 | 2.750 | 2.875 | -- | -- | 0.250 | 4.000 | 4.250 | 4.750 |
2 | 3.000 | 2.925 | 3.075 | 0.444 | -- | 0.250 | 4.250 | 4.500 | 5.000 |
2 1/4 | 3.375 | 3.300 | 3.450 | 0.444 | -- | 0.250 | 4.750 | 5.000 | 5.500 |
2 1/2 | 3.750 | 3.675 | 3.825 | 0.500 | -- | 0.250 | 5.250 | 5.500 | 6.000 |
2 3/4 | 4.125 | 4.050 | 4.200 | 0.500 | -- | 0.250 | 5.750 | 6.000 | 6.500 |
3 | 4.500 | 4.425 | 4.575 | 0.500 | -- | 0.250 | -- | 6.500 | 7.000 |
3 1/4 | 4.875 | 4.775 | 4.975 | 0.500 | -- | 0.250 | -- | 7.000 | 7.500 |
3 1/2 | 5.250 | 5.150 | 5.350 | 0.500 | -- | 0.250 | -- | 7.500 | 8.000 |
3 3/4 | 5.625 | 5.525 | 5.725 | 0.500 | -- | 0.250 | -- | 8.000 | 8.500 |
4 | 6.000 | 5.900 | 6.100 | 0.500 | -- | 0.250 | -- | 8.500 | 9.000 |
Different Types Of Stainless Steel 347 Stud Bolt
![](https://www.pipefittingsolutions.com/wp-content/uploads/2022/10/studs-bolt.png)
Different Types Of Studs Bolts
- ASTM A193 Stainless Steel 347 Full Threaded Stud Bolt
- UNS S34700 Tap End Threaded Rod
- ASTM A193 Stainless Steel 347 Double End Threaded Rod
- DIN 1.455 Half Threaded Stud Bolt
- SS 347 Bonding Stud Bolt
- ASTM A193 Stainless Steel 347 Half Threaded Rod
- UNS S34700 Double End Stud Bolt
- ASME SA193 Stainless Steel 347 Tap End Stud Bolt
- DIN 1.455 Full Threaded Stud Bolt
- SS 347 Tap End Threaded Rod
- 347 Stainless Steel Double End Threaded Rod
Application of Stainless Steel 347 Stud Bolt
Testing of Stainless Steel 347 Stud Bolt
Packing of Stainless Steel 347 Stud Bolt
Destination Of Stainless Steel 347 Stud Bolt
- City We Deliver
- Country We Export
- People Also Search