Stainless Steel 321 Fasteners
Stainless Steel Fasteners
- Stainless Steel 304 Fasteners
- Stainless Steel 304L Fasteners
- Stainless Steel 304H Fasteners
- Stainless Steel 310 Fasteners
- Stainless Steel 316 Fasteners
- Stainless Steel 316L Fasteners
- Stainless Steel 316H Fasteners
- Stainless Steel 317 Fasteners
- Stainless Steel 321 Fasteners
- Stainless Steel 347 Fasteners
- Stainless Steel 904L Fasteners
- 254 SMO Fasteners
Stainless Steel 321 Fasteners, ASME SA193 UNS S32100 Hex Bolt, SS 321 Stud Bolt, ASTM A193 Heavy Hex Nut, DIN 1.4541 Allen Bolt, Grade 321 Plain Washer, UNS S32100 Spring Washer.
What does a Stainless Steel 321 Fastener stand for?
Fasteners of the stainless steel 321 grade, which are austenitic and titanium stabilised, exhibit good all-around protection against corrosion. Because of its exceptional susceptibility to a corrosive environment when subjected to temperatures between 427° C and 816° C with chromium precipitation, the 321 grade of stainless steel was developed.
The combination of 321 stainless steel fasteners is stabilized against the development of chromium carbide due to the inclusion of titanium. These fasteners are used in various process conditions to resist corrosion and pitting. It is widely used in electrochemical reactions, especially in manufacturing phosphate-based fertilizers.
How Long Does Stainless Steel Fastener Last?
Depending on the material they are secured to and the amount of use, stainless steel fasteners can survive for many years. Stainless steel fasteners may persist for many years with proper maintenance and upkeep. A UNS S32100 Stud Bolt can survive at least for 15 years. Tightening and loosening the stainless steel fasteners can reduce the lifespan of the buckle to three years or less in high-use situations when DIN 1.4541 Heavy Hex Bolts are often constricted and loosened.
Characteristics of Stainless Steel 321 Fastener:
- The material’s minimum yield strength is 205 MPa. This allows the fasteners to be used in applications using high-temperature.
- The material’s minimum tensile strength is 515Mpa.
- Sea water and maritime situations won’t cause the 316 fasteners to corrode.
- The manufacturing process of such fasteners involves heat treatment, surface plating, insert tapping, wire drawing, cold heading, inspection, and packing.
- Tolerance of ASTM A193 SS 321 Fasteners ranges from +/-0.01mm to +/-0.05mm.
Previous
Next
About Stainless Steel 321 Fasteners
Benefits of Stainless Steel 321 Fasteners:
- Strong resistance to SCC in halide environments
- Strong resistance to pitting and crevice corrosion
- High yield strength and tensile strength
- Strong general resistance to corrosion
- High thermal conductivity and little thermal expansion
- Exceptional mechanical toughness
- A greater ability to withstand corrosive, erosive, and fatigue corrosion
Applications of Stainless Steel 321 Fastener:
Grade 321 PTFE Coated Bolts and screws, Cap fasteners, Metal Forming Screws, Hex Cap Fastenings, and any cold-tipped or hot-welded fasteners are frequently made of stainless steel. Because of its capacity to withstand the corrosive effects of organic acids, it is commonly employed in restaurant management and coloring applications. Other applications include:
- Chemical processing: machinery for making phosphoric, sulfuric, inorganic, and organic acids as well as phosphate-based fertilizers
- Metallurgical processing: sulfuric acid pickling apparatus
- Types of equipment used in the process of oil and gas extraction.
- Process equipment for the pharmaceutical industry
- Equipment for processing pulp and paper
- Pipe systems, condensers, and heat exchangers for saltwater and brackish water
Specification Of Stainless Steel 321 Fasteners
| Specifications | ASTM A 193 / ASME SA 193 and DIN, ISO ,JIS ,GB, IS, BS, ASTM and all International Standards |
| Size | M3 - M100 | 3/6″ - 4″ | Custom Sizes |
| Fasteners Length | 3 mm - 200 mm | Custom Sizes |
| Nuts Size | M3 - M56 | 3/6" to 2" | Custom Sizes |
| Washers Size | M3 - M56 | 3/6" to 2" | Custom Sizes |
| Dimensions | DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 |
| Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads and UNF, BSW, BSF, METRIC, UNC, or as required |
| Form | Hex, Threading, Square, Round as per Gauge Etc. |
| Head | Hex, Square, Round, Hex flange, Flat, T-head & Triangular etc. |
| Neck type | Hex, Square, Triangular, Oval & Knurled etc. |
| Manufacturing Process | Passivation /plain, Wire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing. |
| Surface Coating | Black Oxide, Cadmium, Galvanized, Teflon, Xylan, Zinc, Others Upon Request |
| Packing | IN BULK: carton, pallet, Small Boxes or customer request |
| Test Certificate | As per EN 10204 / 3.1 Manufacturer Test Certificate, PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
| Certification | Dual Certified As per ASTM & ASME Codes |
| Delivery time | Regular product : 7-15 days, Custom product : 2-4 weeks |
Equivalent Grades Stainless Steel 321 Fasteners
| STANDARD | WERKSTOFF NR. | UNS | JIS | EN |
| SS 321 | 1.4541 | S32100 | SUS 321 | X6CrNiTi18-10 |
Chemical Composition Stainless Steel 321 Fasteners
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
| SS 321 | 0.08 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 - 19.00 | - | 9.00 - 12.00 | - |
Mechanical Properties Stainless Steel 321 Fasteners
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 321 | 515 MPa | 205 MPa | 40% | 95 | 217 |
Dimensions Of Stainless Steel 321 Fasteners
Stainless Steel Bolts Dimensions Chart :
| Nominal Size or Basic Product Diameter | Full-Size Body Diameter, E | Width Across Flats, F | Width Across Corners, G | Head Height, H Basic | Radius of Fillet, R | Nominal Thread Length for Bolt Lengths, LT |
|||||||||
| inch | mm | Max | Min | Basic inch | Max | Min | Max | Min | Basic inch | Max | Min | Max | Min | 6 in. and Shoter | Over 6 in. |
| 1⁄4 | 0.25 | 0.26 | 0.237 | 7⁄16 | 0.438 | 0.425 | 0.505 | 0.484 | 11⁄64 | 0.188 | 0.15 | 0.03 | 0.01 | 0.75 | 1 |
| 5⁄16 | 0.3125 | 0.324 | 0.298 | 1⁄2 | 0.5 | 0.484 | 0.577 | 0.552 | 7⁄32 | 0.235 | 0.195 | 0.03 | 0.01 | 0.875 | 1.125 |
| 3⁄8 | 0.375 | 0.388 | 0.36 | 9⁄16 | 0.562 | 0.544 | 0.65 | 0.62 | 1⁄4 | 0.268 | 0.226 | 0.03 | 0.01 | 1 | 1.25 |
| 7⁄16 | 0.4375 | 0.452 | 0.421 | 5⁄8 | 0.625 | 0.603 | 0.722 | 0.687 | 19⁄64 | 0.316 | 0.272 | 0.03 | 0.01 | 1.125 | 1.375 |
| 1⁄2 | 0.5 | 0.515 | 0.482 | 3⁄4 | 0.75 | 0.725 | 0.866 | 0.826 | 11⁄32 | 0.364 | 0.302 | 0.03 | 0.01 | 1.25 | 1.5 |
| 5⁄8 | 0.625 | 0.642 | 0.605 | 15⁄16 | 0.938 | 0.906 | 1.083 | 1.033 | 27⁄64 | 0.444 | 0.378 | 0.06 | 0.02 | 1.5 | 1.75 |
| 3⁄4 | 0.75 | 0.768 | 0.729 | 11⁄8 | 1.125 | 1.088 | 1.299 | 1.24 | 1⁄2 | 0.524 | 0.455 | 0.06 | 0.02 | 1.75 | 2 |
| 7⁄8 | 0.875 | 0.895 | 0.852 | 1 5⁄16 | 1.312 | 1.269 | 1.516 | 1.447 | 37⁄64 | 0.604 | 0.531 | 0.06 | 0.02 | 2 | 2.25 |
| 1 | 1 | 1.022 | 0.976 | 1 1⁄2 | 1.5 | 1.45 | 1.732 | 1.653 | 43⁄64 | 0.7 | 0.591 | 0.09 | 0.03 | 2.25 | 2.5 |
| 1 1⁄8 | 1.125 | 1.149 | 1.098 | 1 11⁄16 | 1.688 | 1.631 | 1.949 | 1.859 | 3⁄4 | 0.78 | 0.658 | 0.09 | 0.03 | 2.5 | 2.75 |
| 1 1⁄4 | 1.25 | 1.277 | 1.223 | 1 7⁄8 | 1.875 | 1.812 | 2.165 | 2.066 | 27⁄32 | 0.876 | 0.749 | 0.09 | 0.03 | 2.75 | 3 |
| 1 3⁄8 | 1.375 | 1.404 | 1.345 | 2 1⁄16 | 2.062 | 1.994 | 2.382 | 2.273 | 29⁄32 | 0.94 | 0.81 | 0.09 | 0.03 | 3 | 3.25 |
| 1 1⁄2 | 1.5 | 1.531 | 1.47 | 2 1⁄4 | 2.25 | 2.175 | 2.598 | 2.48 | 1 | 1.036 | 0.902 | 0.09 | 0.03 | 3.25 | 3.5 |
| 1 5⁄8 | 1.625 | 1.658 | 1.591 | 2 7⁄16 | 2.438 | 2.356 | 2.815 | 2.616 | 1 3⁄32 | 1.116 | 0.978 | 0.09 | 0.03 | 3.5 | 3.75 |
| 1 3⁄4 | 1.75 | 1.785 | 1.716 | 2 5⁄8 | 2.625 | 2.538 | 3.031 | 2.893 | 1 5⁄32 | 1.196 | 1.054 | 0.12 | 0.04 | 3.75 | 4 |
| 1 7⁄8 | 1.875 | 1.912 | 1.839 | 2 13⁄16 | 2.812 | 2.719 | 3.248 | 3.099 | 1 1⁄4 | 1.276 | 1.13 | 0.12 | 0.04 | 4 | 4.25 |
| 2 | 2 | 2.039 | 1.964 | 3 | 3 | 2.9 | 3.464 | 3.306 | 1 11⁄32 | 1.388 | 1.175 | 0.12 | 0.04 | 4.25 | 4.5 |
| 2 1⁄4 | 2.25 | 2.305 | 2.214 | 3 3⁄8 | 3.375 | 3.262 | 3.897 | 3.719 | 1 1⁄2 | 1.548 | 1.327 | 0.19 | 0.06 | 4.75 | 5 |
| 2 1⁄2 | 2.5 | 2.559 | 2.461 | 3 3⁄4 | 3.75 | 3.625 | 4.33 | 4.133 | 1 21⁄32 | 1.708 | 1.479 | 0.19 | 0.06 | 5.25 | 5.5 |
| 2 3⁄4 | 2.75 | 2.827 | 2.711 | 4 1⁄8 | 4.125 | 3.988 | 4.763 | 4.546 | 1 13⁄16 | 1.869 | 1.632 | 0.19 | 0.06 | 5.75 | 6 |
| 3 | 3 | 3.081 | 2.961 | 4 1⁄2 | 4.5 | 4.35 | 5.196 | 4.959 | 2 | 2.06 | 1.815 | 0.19 | 0.06 | 6.25 | 6.5 |
| 3 1⁄4 | 3.25 | 3.335 | 3.21 | 4 7⁄8 | 4.875 | 4.712 | 5.629 | 5.372 | 2 3⁄16 | 2.251 | 1.936 | 0.19 | 0.06 | 6.75 | 7 |
| 3 1⁄2 | 3.5 | 3.589 | 3.461 | 5 1⁄4 | 5.25 | 5.075 | 6.062 | 5.786 | 2 5⁄16 | 2.38 | 2.057 | 0.19 | 0.06 | 7.25 | 7.5 |
| 3 3⁄4 | 3.75 | 3.858 | 3.726 | 5 5⁄8 | 5.625 | 5.437 | 6.495 | 6.198 | 2 1⁄2 | 2.572 | 2.241 | 0.19 | 0.06 | 7.75 | 8 |
| 4 | 4 | 4.111 | 3.975 | 6 | 6 | 5.8 | 6.928 | 6.612 | 2 11⁄16 | 2.764 | 2.424 | 0.19 | 0.06 | 8.25 | 8.5 |
Stainless Steel Stud Bolts Dimensions Chart :
| Nominal Size Diameter, D inch | Tap End Full Thread Length, BM | Umax = 2P | Minimum Nut End Full Thread Length, Bmin |
||||||
| Nominal | Min. | Max. | UNC & NC-5 Thread | UNF Thread | 8UN Thread | L ≤ 10 | 10 | L > 16 | |
| 1/4 | 0.375 | 0.350 | 0.400 | 0.100 | 0.071 | ... | 0.750 | 1.000 | 1.500 |
| 5/16 | 0.469 | 0.440 | 0.498 | 0.111 | 0.083 | -- | 0.875 | 1.125 | 1.625 |
| 3/8 | 0.563 | 0.532 | 0.594 | 0.125 | 0.083 | -- | 1.000 | 1.250 | 1.750 |
| 7/16 | 0.656 | 0.620 | 0.692 | 0.143 | 0.100 | -- | 1.125 | 1.375 | 1.875 |
| 1/2 | 0.750 | 0.708 | 0.792 | 0.154 | 0.100 | -- | 1.250 | 1.500 | 2.000 |
| 9/16 | 0.844 | 0.802 | 0.896 | 0.167 | 0.111 | -- | 1.375 | 1.625 | 2.125 |
| 5/8 | 0.938 | 0.892 | 0.983 | 0.182 | 0.111 | -- | 1.500 | 1.750 | 2.250 |
| 3/4 | 1.1.25 | 1.075 | 1.175 | 0.200 | 0.125 | -- | 1.750 | 2.000 | 2.500 |
| 7/8 | 1.313 | 1.258 | 1.368 | 0.222 | 0.143 | -- | 2.000 | 2.250 | 2.750 |
| 1 | 1.500 | 1.438 | 1.562 | 0.250 | 0.167 | -- | 2.250 | 2.500 | 3.000 |
| 1 1/8 | 1.688 | 1.625 | 1.750 | 0.286 | 0.167 | 0.250 | 2.500 | 2.750 | 3.250 |
| 1 1/4 | 1.875 | 1.813 | 1.938 | 0.286 | 0.167 | 0.250 | 2.750 | 3.000 | 3.500 |
| 1 3/8 | 2.063 | 2.000 | 2.125 | 0.333 | 0.167 | 0.250 | 3.000 | 3.250 | 3.750 |
| 1 1/2 | 2.250 | 2.188 | 2.313 | 0.333 | 0.167 | 0.250 | 3.250 | 3.500 | 4.000 |
| 1 5/8 | 2.438 | 2.375 | 2.500 | -- | -- | 0.250 | 3.500 | 3.750 | 4.250 |
| 1 3/4 | 2.625 | 2.563 | 2.688 | 0.400 | -- | 0.250 | 3.750 | 4.000 | 4.500 |
| 1 7/8 | 2.813 | 2.750 | 2.875 | -- | -- | 0.250 | 4.000 | 4.250 | 4.750 |
| 2 | 3.000 | 2.925 | 3.075 | 0.444 | -- | 0.250 | 4.250 | 4.500 | 5.000 |
| 2 1/4 | 3.375 | 3.300 | 3.450 | 0.444 | -- | 0.250 | 4.750 | 5.000 | 5.500 |
| 2 1/2 | 3.750 | 3.675 | 3.825 | 0.500 | -- | 0.250 | 5.250 | 5.500 | 6.000 |
| 2 3/4 | 4.125 | 4.050 | 4.200 | 0.500 | -- | 0.250 | 5.750 | 6.000 | 6.500 |
| 3 | 4.500 | 4.425 | 4.575 | 0.500 | -- | 0.250 | -- | 6.500 | 7.000 |
| 3 1/4 | 4.875 | 4.775 | 4.975 | 0.500 | -- | 0.250 | -- | 7.000 | 7.500 |
| 3 1/2 | 5.250 | 5.150 | 5.350 | 0.500 | -- | 0.250 | -- | 7.500 | 8.000 |
| 3 3/4 | 5.625 | 5.525 | 5.725 | 0.500 | -- | 0.250 | -- | 8.000 | 8.500 |
| 4 | 6.000 | 5.900 | 6.100 | 0.500 | -- | 0.250 | -- | 8.500 | 9.000 |
Stainless Steel Nuts Dimensions :
| Nominal Size inch | Basic Major Diameter of Thread | Width Across Flats, F | Width Across Corners, G | Thickness Heavy Hex Nuts, H | Thickness Heavy Hex Jam Nuts, H1 | Maximum Runout of Bearing Surface to Thread Axis, FIM |
|||||||||
| Heavy HEX NUTS | Heavy Hex Jam Nuts |
||||||||||||||
| Specified Proof load | |||||||||||||||
| Basic inch | Min. | Max | Min. | Max | Basic inch | Min. | Max | Basic inch | Min. | Max | Up to 150,000 psi | 150,000 psi and Greater | All Strength Levels |
||
| 1/4 | 0.2500 | 1/2 | 0.488 | 0.500 | 0.556 | 0.577 | 15/64 | 0.218 | 0.250 | 11/64 | 0.156 | 0.188 | 0.017 | 0.011 | 0.017 |
| 5/16 | 0.3125 | 9/16 | 0.546 | 0.562 | 0.622 | 0.650 | 19/64 | 0.280 | 0.314 | 13/64 | 0.186 | 0.220 | 0.020 | 0.012 | 0.020 |
| 3/8 | 0.3750 | 11/16 | 0.669 | 0.688 | 0.763 | 0.794 | 23/64 | 0.341 | 0.377 | 15/64 | 0.216 | 0.252 | 0.021 | 0.014 | 0.021 |
| 7/16 | 0.4375 | 3/4 | 0.728 | 0.750 | 0.830 | 0.866 | 27/64 | 0.403 | 0.441 | 17/64 | 0.247 | 0.285 | 0.022 | 0.015 | 0.022 |
| 1/2 | 0.5000 | 7/8 | 0.850 | 0.875 | 0.969 | 1.010 | 31/64 | 0.464 | 0.504 | 19/64 | 0.277 | 0.317 | 0.023 | 0.016 | 0.023 |
| 9/16 | 0.5625 | 15/16 | 0.909 | 0.938 | 1.037 | 1.083 | 35/64 | 0.526 | 0.568 | 21/64 | 0.307 | 0.349 | 0.024 | 0.017 | 0.024 |
| 5/8 | 0.6250 | 1 1/16 | 1.031 | 1.062 | 1.175 | 1.227 | 39/64 | 0.587 | 0.631 | 23/64 | 0.337 | 0.381 | 0.025 | 0.018 | 0.025 |
| 3/4 | 0.7500 | 1 1/4 | 1.212 | 1.250 | 1.382 | 1.443 | 47/64 | 0.710 | 0.758 | 27/64 | 0.398 | 0.446 | 0.027 | 0.020 | 0.027 |
| 7/8 | 0.8750 | 1 7/16 | 1.394 | 1.438 | 1.589 | 1.660 | 55/64 | 0.833 | 0.885 | 31/64 | 0.458 | 0.510 | 0.029 | 0.022 | 0.029 |
| 1 | 1.0000 | 1 5/8 | 1.575 | 1.625 | 1.796 | 1.876 | 63/64 | 0.956 | 1.012 | 35/64 | 0.519 | 0.575 | 0.031 | 0.024 | 0.031 |
| 1 1/8 | 1.1250 | 1 13/16 | 1.756 | 1.812 | 2.002 | 2.093 | 1 7/64 | 1.079 | 1.139 | 39/64 | 0.579 | 0.639 | 0.033 | 0.027 | 0.033 |
| 1 1/4 | 1.2500 | 2 | 1.938 | 2.000 | 2.209 | 2.309 | 1 7/32 | 1.187 | 1.251 | 23/32 | 0.687 | 0.751 | 0.035 | 0.030 | 0.035 |
| 1 3/8 | 1.3750 | 2 3/16 | 2.119 | 2.188 | 2.416 | 2.526 | 1 11/32 | 1.310 | 1.378 | 25/32 | 0.747 | 0.815 | 0.038 | 0.033 | 0.038 |
| 1 1/2 | 1.5000 | 2 3/8 | 2.300 | 2.375 | 2.622 | 2.742 | 1 15/32 | 1.433 | 1.505 | 27/32 | 0.808 | 0.880 | 0.041 | 0.036 | 0.041 |
| 1 5/8 | 1.6250 | 2 9/16 | 2.481 | 2.562 | 2.828 | 2.959 | 1 19/32 | 1.556 | 1.632 | 29/32 | 0.868 | 0.944 | 0.044 | 0.038 | 0.044 |
| 1 3/4 | 1.7500 | 2 3/4 | 2.662 | 2.750 | 3.035 | 3.175 | 1 23/32 | 1.679 | 1.759 | 31/32 | 0.929 | 1.009 | 0.048 | 0.041 | 0.048 |
| 1 7/8 | 1.8750 | 2 15/16 | 2.844 | 2.938 | 3.242 | 3.392 | 1 27/32 | 1.802 | 1.886 | 1 1/32 | 0.989 | 1.073 | 0.051 | 0.044 | 0.051 |
| 2 | 2.0000 | 3 1/8 | 3.025 | 3.125 | 3.449 | 3.608 | 1 31/32 | 1.925 | 2.013 | 1 3/32 | 1.050 | 1.138 | 0.055 | 0.047 | 0.055 |
| 2 1/4 | 2.2500 | 3 1/2 | 3.388 | 3.500 | 3.862 | 4.041 | 2 13/64 | 2.155 | 2.251 | 1 13/64 | 1.155 | 1.251 | 0.061 | 0.052 | 0.061 |
| 2 1/2 | 2.5000 | 3 7/8 | 3.750 | 3.875 | 4.275 | 4.474 | 2 29/64 | 2.401 | 2.505 | 1 29/64 | 1.401 | 1.505 | 0.068 | 0.058 | 0.068 |
| 2 3/4 | 2.7500 | 4 1/4 | 4.112 | 4.250 | 4.688 | 4.907 | 2 45/64 | 2.647 | 2.759 | 1 37/64 | 1.522 | 1.634 | 0.074 | 0.064 | 0.074 |
| 3 | 3.0000 | 4 5/8 | 4.475 | 4.625 | 5.102 | 5.340 | 2 61/64 | 2.893 | 3.013 | 1 45/64 | 1.643 | 1.763 | 0.081 | 0.070 | 0.081 |
| 3 1/4 | 3.2500 | 5 | 4.838 | 5.000 | 5.515 | 5.774 | 3 3/16 | 3.124 | 3.252 | 1 13/16 | 1.748 | 1.876 | 0.087 | 0.075 | 0.087 |
| 3 1/2 | 3.5000 | 5 3/8 | 5.200 | 5.375 | 5.928 | 6.207 | 3 7/16 | 3.370 | 3.506 | 1 15/16 | 1.870 | 2.006 | 0.094 | 0.081 | 0.094 |
| 3 3/4 | 3.7500 | 5 3/4 | 5.562 | 5.750 | 6.341 | 6.640 | 3 11/16 | 3.616 | 3.760 | 2 1/16 | 1.990 | 2.134 | 0.100 | 0.087 | 0.100 |
| 4 | 4.0000 | 6 1/8 | 5.925 | 6.125 | 6.755 | 7.073 | 3 15/16 | 3.862 | 4.014 | 2 3/16 | 2.112 | 2.264 | 0.107 | 0.093 | 0.107 |
Stainless Steel Washer Dimensions Chart :
| Nominal Size | T | Clipped Width E, Min. | ||||||||||||
| I.D. | O.D. | Standard | Extra Thick | |||||||||||
| [Note (1)] | Max. | Min. | Max. | Min. | Max. | Min. | Max. | Min. | [Note (2)] | |||||
| 12 | 14.4 | 14 | 27 | 25.7 | 4.6 | 3.1 | 10 | 8 | 10.5 | |||||
| 16 | 18.4 | 18 | 34 | 32.4 | 4.6 | 3.1 | 10 | 8 | 14 | |||||
| 20 | 22.5 | 22 | 42 | 40.4 | 4.6 | 3.1 | 10 | 8 | 17.5 | |||||
| 22 | 24.5 | 24 | 44 | 42.4 | 4.6 | 3.4 | 10 | 8 | 19.2 | |||||
| 24 | 26.5 | 26 | 50 | 48.4 | 4.6 | 3.4 | 10 | 8 | 21 | |||||
| 27 | 30.5 | 30 | 56 | S4.1 | 4.6 | 3.4 | 10 | 8 | 23.6 | |||||
| 30 | 33.6 | 33 | 60 | 58.1 | 4.6 | 3.4 | 10 | 8 | 26.2 | |||||
| 36 | 39.6 | 39 | 72 | 70.1 | 4.6 | 3.4 | 10 | 8 | 31.S | |||||
| 42 | 45.6 | 45 | 84 | 81.8 | 7.2 | 4.6 | 10 | 8 | 36.7 | |||||
| 48 | 52.7 | 52 | 95 | 92.8 | 7.2 | 4.6 | 10 | 8 | 42 | |||||
| 56 | 62.7 | 62 | 107 | 104.8 | 8.7 | 6.1 | 10 | 8 | 49 | |||||
| 64 | 70.7 | 70 | 118 | 115.8 | 8.7 | 6.1 | 10 | 8 | 56 | |||||
| 72 | 78.7 | 78 | 130 | 127.5 | 8.7 | 6.1 | 10 | 8 | 63 | |||||
| 80 | 86.9 | 86 | 142 | 139.5 | 8.7 | 6.1 | 10 | 8 | 70 | |||||
| 90 | 96.9 | 96 | 159 | 156.5 | 8.7 | 6.1 | 10 | 8 | 78.7 | |||||
| 100 | 107.9 | 107 | 176 | 173.5 | 8.7 | 6.1 | 10 | 8 | 87.5 | |||||
Different Types Of Stainless Steel 321 Fasteners
Different Types Of Bolts
- Stainless Steel 321 Bolts
- DIN 1.4541 Carriage Bolts
- ASTM A193 SS 321 Hex Bolts
- SS 321 Forged Hook Bolts
- ASTM A193 UNS S32100 Eye Bolts
- SS 321 Allen Bolts
- Alloy 321 Flange Head Bolts
- 321 SS Hex Head Bolts
- 321 Stainless Steel Torx Bolts
- UNS S32100 12-Point Flange Bolts
- SS 321 Countersunk Bolts
- A2-70 Stainless Steel Bolts
Different Types Of Studs Bolts
- Stainless Steel 321 Tap End Stud bolt
- UNS S32100 Continuous Threaded Stud bolt
- ASTM A193 SS 321 Double End Stud bolt
- ASME SA193 SS 321 Flange Stud bolt
- Werkstoff Nr. 1.4541 Fully Threaded Rod
- ASTM A193 UNS S32100 Stud Bolts
- A2-70 SS 321 Stud Bolts
- Grade 321 Half Threaded Rod
- 321 Stainless Steel Stud Bolts
- SS 321 Hexagonal Stud bolts
- DIN 1.4541 SS 321 Threaded Stud bolts
Different Types Of Nuts
- Stainless Steel 321 Metric Nuts
- 321 SS Sleeve Nuts
- DIN 1.4541 Captive Nuts
- ASTM A193 SS 321 Hex Nuts
- UNS S32100 Rivet Nuts
- ASME SA 193 Acorn Nuts
- ASME SA193 SS 321 T Nuts
- Alloy 321 Dome Nuts
- ASTM A193 Grade 321 Lug Nut
- ASTM A193 UNS S32100 Castle Nuts
- SS 321 12-Point Nuts
- 321 Stainless Steel Lock Nuts
Different Types Of Washer
- UNS S32100 Sealing Washer
- ASTM A193 SS 321 Plain Washer
- DIN 1.4541 Split Washer
- UNS S32100 Square Washer
- SS 321 Spring Washer
- Alloy 321 Star Washer
- Stainless Steel 321 Spring Washer
- ASME SA193 SS 321 Tab Washer
- ASTM A193 Grade 321 Flat Washer
- 321 SS Lock Washer
Different Types Of Screw
- SS 321 Self Drilling Screws
- Stainless Steel 321 Self Tapping Screws
- ASTM A193 Grade 321 Wood Screws
- DIN 1.4541 Grub Screws
- Grade 321 Polished Screws
- ASME SA193 SS 321 Countersunk Screws
- ASTM A193 SS 321 Torx Screws
- UNS S32100 Roofing Screws
Application of Stainless Steel 321 Fasteners
Previous
Next
Testing of Stainless Steel 321 Fasteners
Previous
Next
Packing of Stainless Steel 321 Fasteners
Previous
Next
Destination Of Stainless Steel 321 Fasteners
Din 1.4541 Head Hex Nut Stockist in Bangalore, ASME SA193 SS 321 Industrial Fasteners Exporter in Nashik, UNS S32100 Hot Forged Bolts Supplier in Vadodara, ASTM A193 Stainless Steel 321 high tensile Bolts Manufacturer in Bharuch, Din 1.4541 Hex nut Exporter in Hyderabad, Din 1.4541 Carriage Bolt Exporter in Dubai, SS 321 Allen Bolt Exporter in Pune, SS 321 Stud Bolt Stockist in Pimpri-Chinchwad, Alloy 321 Lag Bolt Manufacturer in Hyderabad, ASTM A193 Stainless Steel 321 Hex Bolt Manufacturer in Bengaluru, SS 321 Square Bolt Stockist in Dammam, Alloy 321 Steel Bolt Supplier in Coimbatore, ASME SA193 SS 321 Spring washer Stockist in Ahmedabad, ASTM A193 Stainless Steel 321 Heavy Hex Bolt Supplier in Chennai, Alloy 321 U Bolt Supplier in Abu Dhabi, UNS S32100 Plain Washer Manufacturer in Mumbai.
UNS S32100 Plain Washer Manufacturer in Singapore, SS 321 Square Bolt Stockist in Italy, ASTM A193 Stainless Steel 321 Heavy Hex Bolt Supplier in UAE, ASTM A193 Stainless Steel 321 high tensile Bolts Manufacturer in Australia, ASTM A193 Stainless Steel 321 Hex Bolt Manufacturer in USA, Alloy 321 Steel Bolt Supplier in Saudi Arabia, SS 321 Allen Bolt Exporter in Qatar, ASME SA193 SS 321 Spring washer Stockist in Malaysia, Din 1.4541 Carriage Bolt Exporter in Canada, UNS S32100 Hot Forged Bolts Supplier in Vietnam, ASME SA193 SS 321 Industrial Fasteners Exporter in Oman, SS 321 Stud Bolt Stockist in UK, Alloy 321 Lag Bolt Manufacturer in Indonesia, Din 1.4541 Head Hex Nut Stockist in South Africa, Din 1.4541 Hex nut Exporter in Kuwait, Alloy 321 U Bolt Supplier in UK.
Buy Stainless 321 Stud bolts, Best Quality of 321 Grade Bolts, ASTM A193 Stainless Steel 321 Weight Chart, UNS S32100 SS Fasteners Price List In India, Austenitic 321 Stainless Steel Nuts, Get UNS S32100 Head Hex Nut Chemical Composition, A wide range of SS 321 Fasteners Size Chart, Alloy 321 Grade Fastener Price Per Kg, Din 1.4541 Hex Bolt Weight Calculator, Stainless Steel 321 Heavy Hex Bolt Dimension PDF, SS 321 Anchor Bolt Price List, ASME SA193 SS 321 Square Bolt Catalogue, Get Quote Now of 321 Fasteners At Factory Price.